We create top notch machineries that increase the productivity and decreases the production cost. The “gold standard” of APR testing protocols, Critical Guidance tests are used to confirm that an innovation is fully compatible with the appropriate plastic recycling stream. The testing plan purposely uses a high level of the innovation in each assessment to reveal potential for a negative impact. The tests and measurements made are intended to reflect conditions appropriate to the diversity of processing technologies and customer requirements found in the plastics recycling industry. Any APR member company may perform Critical Guidance tests in their own labs to determine the compatibility of their own technologies or materials with recycling systems. Our leading experts provide insight regarding material properties, strength, durability and performance for medical device and pharmaceutical packaging. They focus on providing tests that work toward package design and have the ability to adjust methods to customize testing. Services include Tensile Test, Tear Test, Puncture Test, Syringe Force, and Sutherland Rub Tests. We can also very accurately determine the thickness of film and shrink properties of packaging films . We can measure the stiffness of films and also determine the strength of heat seals.
Several types of accelerated aging of packaging and materials can be accomplished in a laboratory. We are the lab solution and testing service provider for the food, pharmaceutical, packaging, printing industries, research institution and college with qualified instruments & service. The machines are running well in over 30,000 laboratories to guarantee the highest quality and service. In this paper, by simulating the friction process of the packaging material itself when the film roll is drawn, the friction coefficient of the inner surface of the rice cake packaging film to the outer surface is detected. Both load compression and load containment are very highly influenced by the film tension setting. Higher F2 settings results in higher compression and also greater containment force. Offsetting this relationship results in a loss in propagated tear resistance for some film formulations.
Innovation in plastics and packaging is necessary to maintain a healthy and competitive industry. To support innovators, the APR has developed a variety of laboratory test method documents that can be used to assess the impact of a plastic design feature or component on recycling. APR test methods combine laboratory practices and measurements developed specifically by and for plastic recyclers with standard ASTM tests. The objective of testing is to determine the impact of a design feature on the processability of a package item as well as the ability of post-consumer resin derived from such feedstocks to meet quality specifications for end-use applications. The puncture resistance tester is a highly efficient and exceptional testing instrument that is used for detection of the strength of the packaging materials against any penetration. Anti-puncture properties are important for the best quality of packaging materials so that the products could easily survive the transit. The test is performed on various materials such as thick boards, thin papers and so forth. These testing methods allow packaging materials to be thoroughly known, thereby becoming an essential part of the design process, with sights on obtaining an effective performance and a more sustainable package.
For more information on how Labthink can help your company profit through testing, please Click the button. C681M Flex Durability Tester is professionally applicable to the determination of flex durability of flexible films, composite films and coating films. In flip top caps, common with ketchup bottles, the flip top opening force determines how much force is needed to open the cap. If the flip top opening force is too high, then opening the cap will also break the hinge. Transit tests check how much stress the packaging can endure while it is being shipped in bundles. The packaging is subjected to different types of stresses when it is out on the road, being transported from point A to B. These stresses are much different from those that the packaging will face in retail stores or when it is with the end user. Transit tests check how many drops, how much inclination or vibration the packaging can endure. Overfill capacity is the capacity of the bottle or jar when filled up to the brim. This allows the manufacturers to determine if certain types of products will fill in certain types of bottles.
Members are provided with comprehensive ways to promote their products, maximizing product exposure and increasing return-on-investment. With the help of dedicated and hard working team of professionals, we are identified as a highly reputedimporter, distributor, exporter, and stockistin the Indian market. These personnel source products from reliable and trustworthy world reputed mfrs. In a short span of time, we have established ourselves in the local as well as global market. We have extensive experience with bioabsorbable polymers, polyurethanes, ultra-high molecular weight polyethylene, polyetheretherketone, nylons and other polymers that are used for implants or medical products. Contact us to learn more about our capabilities and experience with testing and analyzing plastics. SGS PSI has decades of experience solving complex challenges involving plastics.
Glass containers with a hydrolytic resistance higher than that recommended for a particular type of preparation may generally also be used. A container should be designed so that the contents may be removed in a manner suitable for the intended use of the article in it. Environmental- Packages are subjected to conditions that reproduce the environment and some evaluation is made at suitable intervals. Such procedures may be applied to testing closures for water vapour transmission. InPneumatic Model, the clamping of the sample is done pneumatically from the pneumatic cylinder and hydraulic pressure is provided to the sample to measure its burst strength. Request more informationto see how we can help you with a packaging testing solution that suits your needs. The Hanatek CCP allows the user to produce production quality crease samples without committing valuable machine time.
Then again, the sacks are comprised of polymer which may get influenced by the UV light. Subsequently, the crude materials utilized in the assembling must be impervious to this light. As more people are working from home to reduce non-essential travel, our technical sales engineers can provide online equipment demos or training sessions via web-based video calls. Cut 3 specimens of 8 cm × 20 cm and 63 mm × 100 mm from the surface of the sample roll film to form 3 sets of test specimens. Through agreeing to this privacy notice you are consenting to Smithers processing your personal data for the purposes outlined. You can withdraw consent at any time, or raise a question or concern by emailing us The solutions we offered, backed up by the data gathered in the Film Lab, cut their costs by over 40%.
The CCO comes complete with commercially produced rules and dies which are identical to those used on a full sized cut and crease machine. Incline impact tester is simulated the impact strength of packaging in the real circumstance of transport. Inverted Pressure Sterilized Boiler is used for sterilization and high-temperature test of packaging materials. Elmendorf Tear Tester is designed to test the tear resistance of paper, film, non-woven fabrics and more. Market Research Methodology – Perfected through Years of Diligence A key factor for our unrivaled market research accuracy is our expert- and data-driven research methodologies. We combine an eclectic mix of experience, analytics, machine learning, and data science to develop research methodologies that result in a multi-dimensional, yet realistic analysis of a market. A wide range of tensile grips, bend jigs and compression fixtures make the MultiTest-i easy to use for measuring tension and compression, from as little as 2 N right up to 5 kN.
Our experts can provide consultative support at every stage of the extractables and leachables process, from understanding extractables and leachables regulatory requirements to deciding on a suitable test strategy to decoding the results. We will work with you to understand you requirements, address your needs and deliver the required results to support your regulatory submission and protect patients. We proudly hold certifications that show our dedication to supplying packaging that meets the most demanding industry standards. We offer innovative packaging solutions with abundant material and feature options to a diverse base of markets. We saw that they were applying film to every single load as if it weighed 2500 lbs. So the loads that weighed a lot less were being wrapped as if they weighed the maximum. Throughout the 1990’s and 2000’s, John helped develop industry leading stretch films for Linear Films and Pliant Corporation, later acquired by Berry Plastics. A number of leading stretch films were developed under his direction, including ADW and ADU at Linear and R122, R410, folded edge Stratos cast handwrap, and Stratos machine films at Pliant.
Often the package is conditioned to the specified environment and tested under those conditions. With some testing, the package is conditioned to a specified environment, then is removed to ambient conditions and quickly tested. With some types of packaging such as food and pharmaceuticals, chemical tests are conducted to determine suitability of food contact materials. Testing programs range from simple tests with little replication to more thorough experimental designs. PET containers have numerous points of interest over different structures, similar to, glass. These are a portion of the regular advantages of utilizing a PET, yet the greatest preferred standpoint is that it is anything but difficult to re-evaluate the plan of plastic pressing in the event that it is bombing over and again. The revaluation procedure does not cost the fortune to the organization but rather unquestionably requires a correct testing process.
A Rheometer is used to measure the rheological properties of molten polymers when varying shear rates and temperatures. A wide number of accessories are used to determine other characteristics of the polymer. A drop tower can be used to measure energy absorbed of a sample or to apply a set amount of damage to a specimen at impact velocities from 1 – 24m/s. Testing plays a critical role in the life cycle of a polymer, from the raw material to the compound through to the semi-finished and finished product. Each stage has different test requirements, and each end user may require a different test solution depending on their role, whether it is in Product Development (R&D), Quality Control , Testing Services , or Research . Partnering with many of our customers we know that developing new products with advanced performance features is not enough in the new, waste-averse economy. With decades of experience across thermal, molecular spectroscopy, chromatography, atomic spectroscopy and hyphenated techniques, you will find PerkinElmer an ideal partner for ensuring the quality and reliability of your polymers and plastics analysis.
Due to all these facts, it becomes important for the manufacturers to ensure that the packaging products that are being used for the packaging purposes are best in terms of quality. Labthink providesLeak Test Equipment for Plastic PET Bottlesof food, drugs, medical instruments, daily chemical products, cars, electronic components, stationeries and other industrial products. This test solution employs a MultiTest-i system, which is controlled via a PC. The software enables a graphical representation of the test to be plotted on screen, with automatic calculation of static and kinetic coefficients of friction. This provides further data regarding the materials surface structure and frictional properties including ‘stiction’ . A coefficient of friction test identifies the frictional values of materials and how different material surfaces relate to one another. For example, if the coefficient if too high, the material cannot be fed through all the machinery efficiently, causing misfeeds. Plastic packaging systems can include—not only the container that holds a particular drug product—but also gaskets, rubber stoppers, tubing and other components that may be part of the overall system used to store and/or deliver a drug to the patient. Rose Plastic’s bespoke solutions are available in a range of foam densities with a wide selection of colours and designs. With CAD/CAM design, multi-axis machining, die-stamp and waterjet cutting, rose plastic offers affordable protective inserts that can accommodate complex shapes and depths to offer a custom solution for your needs.
This is because plastic components contain other substances, such as plasticizers, stabilizers, antioxidants, pigments, lubricants and possibly residues from polymerization. Therefore, for components that are in direct with the product, this testing is required to ensure that the product is not affected during its life. When the components have been identified for a particular product, the validation of packaging operation is required. This is to ensure that a consistent pack quality is obtained at the required packaging rate. USP and IP provide two tests to determine the chemical resistance of glass containers. Ensure that the highly useful testing device can measure the bursting strength of the materials such as corrugated boxes, papers, cartons, multi-layered boards, single layered – boards, etc. Packaging products play a significant role to define the quality of the products. Packaging helps to keep the domestic as well as industrial products safe and unaffected from all sorts of interference and external impacts. Moreover, the prime factor of packaging is to make the products appealing and present in front of the customers beautifully. If the product does not appear good, it can directly disturb the quality of the products and can also modify the buying decisions of the customers.